TRAINING BULK MATERIALS HANDLING

TRAINING FUNDAMENTAL OF BULK MATERIALS HANDLING

TRAINING PENERAPAN BULK MATERIALS HANDLING

training conveyors and chutes overview di jakarta

bulk materials handling

ABSTRACT
The workshop is broken into three days – the first two days will cover basic conveyors, selection, safety, legal obligations, terminology and background and an optional third day will deal with the nuts and bolts of conveyor, chute and feeder design. Belt conveyors frequently provide the most satisfactory and economical method of transporting materials such as mine ores, earth, sand, crushed stone, cement and concrete. The high and continuous speed of operation of the belt makes for a high capacity of transport of materials. This workshop is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to troubleshooting, maintenance and basic design rules of conveyors and chutes. It is intended to cover the fundamentals of belt conveying and would be useful for those with little experience in this area. Before commencing a detailed course on conveyors it is important to have a solid practical knowledge of the material to be
conveyed.

A basic knowledge is provided of the bulk materials characteristics and properties. This will enable you to have a far stronger ability to troubleshoot and design workable conveyor systems. Numerous tips throughout the course make it practical and topical. You will also engage in problem solving and case studies to absorb the materials as quickly and effectively as possible.

COURSE CONTENT
1.  INTRODUCTION
* Fundamentals of bulk materials handling
* Nature of bulk solids
* Characteristics of generally used bulk materials
* Conveyors and chutes overview

2. BELT CONVEYING
* Introduction
* Layout
* Basic Configuration
* Components of a standard conveyor
* Capacity of belt conveyors and selection of belt width
* Materials and components Selection
* Pulley & Other rotating Parts
* Simple calculation of belt tension
* Selection of drive
* Troubleshooting tips
* Take-ups
* Belts Operations
* Tips for cost savings
* Practical Exercise

3. SAFETY OF CONVEYORS
* Conveyor safety standard
* General background on AS 4024.1 (RA and hazard recognition)
* Hazard recognition
* History of accidents
* Key conveyor safety issues
* Demonstration of unsafe conveyors
* AS 1755 conveyors
* Chute doors hazards and controls
* Case Study
* Practical Exercise

4.  TROUBLESHOOTING OF CONVEYORS
* Troubleshooting conveyor problems
* Types of joints
* Splice failures
* Splice inspections
* Splice repairs
* Typical problems
* Root cause process
* Systematic approach for tracking
* Site specific problems
* Case Study
* Practical Exercise

5.    STORAGE AND FLOW
* Flow properties of materials
* Funnel – flow and expanded flow
* Flow rate analysis
* Gravity reclaim
* Bin wall pressures
* Practical Exercise

6. BELT TENSION CALCULATION
* Carrying Surface
* Drive Data
* Environment
* Height
* Length
* Loading Rate
* Material
* Pulley Diameter
* Speed
* Take-up. Type
* Width of Belt (Inches)

7. SELECT THE PROPER REINFORCEMENT (USUALLY FABRIC) COMBINATIONS
* Flexibility to negotiate the pulleys
* Troughability
* Impact Resistance
* Load Support

8. CHUTE DESIGN
* Liner selection
* Use of solidworks
* DEM and application to transfer design
* Stress analysis using cosmos
* Chute Design Exercise

9. FEEDER DESIGN
* Calculation of loads/drive torques and power
* Feeder selection
* Feeder Design Exercise

10.APPLICATIONS AND FUTURE TRENDS
* Case studies
* Future trends in conveyors, feeders and chutes

INSTRUCTOR
Teguh Pudji Purwanto,Ir,MT
Pakar sekaligus praktisi di bidang Mechanical dan Electrical Engineering, dan akademisi di bidang Belt Conveyor.

WHO WILL BENEFIT/PARTICIPANT
* Technicians and Maintenance Engineers
* Plant Engineers
* Operation, Maintenance, Inspection and Repair Managers,
* Supervisors and Engineers
* Mechanical Engineers and Technicians
* Design Engineers
* Electrical Engineers and Technicians
* Consulting Engineers

COURSE METHODS
* Presentation
* Discuss
* Case Study
* Evaluation
* Simulation

Jadwal pustraindo.com tahun 2020 :

21-23 Januari 2020

18-20 Februari 2020

17-19 Maret 2020

14-16 April 2020

16-18 Juni 2020

14-16 Juli 2020

11-13 Agustus 2020

8-10 September 2020

13-15 Oktober 2020

10-13 November 2020

15-17 Desember 2020

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan pustraindo.com:

  • Yogyakarta, Hotel Dafam Malioboro (7.250.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (7.750.000 IDR / participant)
  • Bandung, Hotel Golden Flower (7.750.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (8.500.000 IDR / participant)
  • Lombok, Hotel Jayakarta (8.750.000 IDR / participant)

Investasi Pelatihan tahun 2020 ini :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Diorama untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Transportasi Peserta ke tempat pelatihan .
  • Module / Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

Technorati Tags: training reviu kertas kerja,temuan audit dan teknik penulisan laporan hasil audit yang efektif pasti jalan,training review kertas kerja pasti jalan,training teknik penulisan laporan hasil audit pasti jalan,training penyusunan laporan hasil audit pasti jalan,pelatihan reviu kertas kerja,pelatihan review kertas kerja pasti running

about author

AdminPustraindo

gus.de.longe@gmail.com

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Leave a Reply

Your email address will not be published. Required fields are marked *